Instructions for the user
5. USING THE RANGETOP
FIRE HAZARD
-Do not allow the burner flame to extend beyond the
edge of the pan.
WARNING
- Turn off all controls when not cooking.
NOTE: Check that the burner rings, burner caps and grates are correctly positioned.
Before lighting the rangetop burners check that the burner rings are correctly in place with their respective burner caps, making sure that the holes A in the burner ring are aligned with the spark electrodes and thermocouples. For the dual burner, place the burner caps G and F on the burner ring D, ensuring that they fit snugly. The burner ring must then be placed on and fitted into the drip tray B (taking care to use the pin C as a guide). The supplied drip tray B is for use with woks. The special pan stand H is for use with woks.
5.1 Ignition safety device
Each burner knob has a marking corresponding to the burner it controls (the example at the left shows the front left burner).
The appliance is equipped with a spark electrode ignition.
- Just press in and turn the knob counterclockwise to the minimum flame symbol | until the burner |
turns on. |
|
-Keep the knob pressed in for about 2 seconds to keep the flame lit and to activate the safety device.
-After turning the burner on, it is recommended that the knob be left in the minimum flame position for approximately 20 seconds before adjusting it to the desired flame intensity.
The flame may go out when the knob is released. In this case, repeat the operation, but keep the knob pressed in for a longer period of time.
14
