Definitive Technology CS-8080HD, CS-8000HD Safety Precautions, Power Supply, Unpacking Your Model

Definitive Technology CS-8060HD & CS-8080HDOWNER’S MANUAL

Safety Precautions

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION! To reduce the risk of electric shock and fire, do not remove the cover or back plate of this device. There are no user serviceable parts inside. Please refer all servicing to licensed service technicians. Avis: Risque de choc electricque, ne pas ouvrir.

CAUTION! The international symbol of a lightning bolt inside a triangle is intended to alert the user to uninsulated “dangerous voltage” within the device’s enclosure. The international symbol of an exclamation point inside a triangle is intended to alert the user to the presence of important operat- ing, maintenance and servicing information in the manual accompanying the device.

CAUTION! To prevent electrical shock, match wide blade of plug to wide slot, fully insert. Attention: Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne correspondante de la prise et pousser jusqu'au fond.

CAUTION! To reduce the risk of electrical shock, do not expose this equip- ment to rain or moisture.

1.Read Instructions—All safety and operating instructions should be read before operating the device.

2.Retain Instructions—The safety and operating instructions should be retained for future reference.

3.Heed Warnings—All warnings on the device and in the operating instructions should be adhered to.

4.Follow Instructions—All operating and safety instructions should be followed.

5.Water & Moisture—The device should never be used in, on or near water for risk of fatal shock.

6.Carts & Stands—The device should only be used on carts or stands rec- ommended by the manufacturer.

7.Wall & Ceiling Mounting—The device should be mounted on a wall or ceiling only as recommended by the manufacturer.

8.Ventilation—The device should always be located in such a way that it maintains proper ventilation.

It should never be placed in a built-in installation or anywhere that may impede the flow of air through its heat sink.

9.Heat—Never locate the device near heat sources such as radiators, floor

registers, stoves or other heat-generating devices.

10. Power Supply—The device should only be connected to a power supply

of the type described in the operating instructions or as marked on the

device.

11. Power Cord Protection—Power cables should be routed so they are not

likely to be stepped on or crushed by items placed on them or against

them. Special attention should be paid to areas where the plug enters a

socket or fused strip and where the cord exits the device.

12. Cleaning—The device should be cleaned in accordance with manufac-

turer’s instructions.

13. Periods Of Non-Use—The device should be unplugged when not being

used for extended periods.

Power Supply

1.The fuse and power disconnect device are located on the back of the speaker.

2.The disconnect device is the power cord, detachable at either the speaker or the wall.

3.The power cord must be disconnected from the speaker before servicing.

Unpacking Your Model

Please Inspect For Shipping Damage

Each loudspeaker leaves our plant in perfect condition. Any visible or concealed damage most likely occurred in handling after it left our plant and should be reported at once to your Definitive dealer or the delivery company that delivered your loudspeaker. Please unpack your system carefully. Save all cartons and packing materials in case you move or need to ship your system. Record the serial number found on the back of the Center Channel in the Notes section of this owner's manual.

Positioning Your Speakers

Your new CS Series speaker is designed to add clarity and focus to the vocal range and extend the musical image of your home theater. To optimize its performance, please follow these simple guidelines. Although the following recommendations will usually yield the best results, whatever sounds best to you is correct.

Figure 1 – Positioning CS Series Center Channel
	above	A center channel
		Speaker should
	or	be placed as
		close to the
		center of your
		television as
		possible without
	below	obstructing
		your view.
1–2"	↔
(2.5–5 cm)

To receive the full benefit of the bass radiators built into your CS Speaker leave at least 1–2" (2.5–5 cm) of space between the top of the speaker and any surface.

Connecting Your Speakers

Figure 2 – Wiring and Polarity

14. Dangerous Entry—Care should be taken that no foreign objects or

liquids fall or are spilled inside the device.

15. Damage Requiring Service—The device should be serviced by licensed

technicians when:

• The plug or power supply cord has been damaged.

• Objects have fallen on or liquid has spilled inside the device.

• The device has been exposed to moisture.

• The device does not appear to be operating properly or exhibits a

marked change in performance.

• The device has been dropped or the cabinet becomes damaged.

16. Service—The device should always be serviced by licensed technicians.

Only replacement parts specified by the manufacturer should be used.

The use of unauthorized substitutions may result in fire, shock, or other

hazards.

Strip 1/4" (6mm) wire.

1

2

+

-

Identify markings on wire and assign +/-.

Receiver/Amplifier

2	1.	Unscrew binding post and insert wire.
	2.	Tighten until wire is secure.

Ensure that the speaker is always connected to the receiver or amplifier + to + and – to –.