Hookup Method One
RCA from Receiver
To Subwoofer
Hookup Method Two
1.Use a Low (Line) Level RCA connection from your receiver’s L and R Line Level Outputs in to the L and R Input of the SubAmp 600. This connection is “summed” within the SubAmp 600.
2.Use Speaker Wire to connect the top set of Sub Out Jacks on the SubAmp 600 to the terminals on the IWSub 10/10.
3.The SubAmp 600 features an Adjustable Crossover setting on its front panel. This setting will work with this connection, giving you extra control over your subwoofer settings.
Hookup Method Two
RCA from Receiver
To Subwoofer
Hookup Method
When using the IWSub 10/10 for stereo applications, you can feed it either Low Level signals as described in Hook Up Methods One and Two, or use Hookup Method Three described here.
1.Connect Speaker Wire from your receiver’s Left and Right outputs to the Speaker Level Inputs on the SubAmp 600.
2.Use Speaker Wire to connect the Speaker Level Outputs of the SubAmp 600 to your loudspeakers.
3.Use Speaker Wire to connect the top set of Sub Out Jacks on the SubAmp 600 to the terminals on the IWSub 10/10.
7
