Definitive Technology IWSUB1010 Installation, Mounting Your SubAmp 600 In An Audio Rack

Important Note Concerning Your IWSub 10/10 and SubAmp 600

Your IWSub 10/10 is specifically designed to be used in conjunction with

the Definitive Technology SubAmp 600 and should never be used with another amplifier. You will not achieve optimal performance, and you may cause dam- age to your IWSub 10/10 if you attempt to power it using another amplifier or receiver. BECAUSE OF THIS, THE IWSUB 10/10 WARRANTY IS VOIDED IF AN AMPLIFIER OR RECEIVER OTHER THAN THE DEFINITIVE TECHNOLOGY SUBAMP 600 IS USED TO DRIVE THIS SUBWOOFER.

Installation

Mounting Your SubAmp 600 In An Audio Rack

Your SubAmp 600 features side mounting brackets for use in professional audio racks. When installing the SubAmp 600 in either professional audio racks or in AV rack furniture, be sure to leave adequate ventilation space around the SubAmp 600 unit.

Mounting Bracket Mounting Bracket

Tools Required for IWSub 10/10 In-Wall Installation

•Pencil for marking the location of installation.

•Keyhole saw or utility knife for cutting drywall.

•Level.

•Screwdriver, preferably powered, with Phillips head bit.

•Power drill with appropriate bit (optional, for starting wall cut).

•Template (included: 143/8" x 197/8").

•Gasket material (included).

1.The IWSub 10/10 is designed to be located between two vertical studs, inside a space of 141/2"–151/2", with the long dimension of the speaker oriented vertically. If your studs are spaced wider than this, you will have to shim one side of the inner wall space to properly secure the speaker in a 141/2"–151/2" space.

4