Replacing the freezer door
1Lower the freezer door bottom hinge hole over the bottom hinge pin and close the door.
2Slide the back of the top hinge into the slot and lower the hinge pin into the top hinge hole of the door.
3Tighten the hinge fastener and
4Snap the hinge cover in place and tighten the screw.
Replacing the refrigerator door
Repeat steps 1 to 4 as described above.
Installation
1 The appliance should be positioned in a dry, well aired place away from heat sources such as stoves, geysers and direct sunlight. Allow an airspace at the rear of the refrigerator for ventilation purposes.
2An electrical wall plug should be nearby and easily accessible.
Electrical Installation
1This appliance uses a
2The appliance should be plugged into a dedicated 15A earthed wall socket. Do not use an extension cord or multiple adaptor.
3If the mains power cord is damaged, it must be replaced by a qualified electrician.
4This appliance must be earthed and the manufacturer and the seller do not accept responsibility for any damage due to incorrect electrical connection.
5This appliance may not be used with a battery inverter power supply.
Page 3
