Introduction
Congratulations on the purchase of this quality appliance.
Please read these instructions carefully before using the product. This book will provide you with information on how to operate and care for your appliance in order that you gain the maximum benefit from it and enjoy many years of trouble free use.
Unpacking
•Please ensure that packaging material is disposed of in a responsible manner.
•Plastic bags should be cut up to prevent children playing with them and accidentally suffocating.
•If the appliance is damaged in any way, do not use it. Report the damage to your dealer, who will take the necessary corrective action.
Before installation
Measure the width of the kitchen entrance through which the unit must pass.
The refrigerator measures 1790mm x 903mm x 735mm. (H x W x D incl. handles.)
If the unit will not pass easily through the kitchen entrance, without risking damage, then either the kitchen door or those of the refrigerator or both should be removed to allow free passage. Once the unit is in position the doors can be
Removing the freezer door
1.Remove the hinge cover screw. Insert a blade or small flat screw driver into the side groove of the hinge cover and pry it loose. Remove the hinge cover.
2.Turn the top hinge fastener 3 to 4 times in an
3.Remove the hinge by lifting the front and pulling it free. Be sure to hold the door securely as the top is now no longer secured.
4.Lift the door free of the bottom hinge pin.
Removing the refrigerator door
The refrigerator door has 1 earth wire to be unscrewed at the top hinge.
Otherwise the procedure is the same as described above.
Page 2
