Y1 Card Components
AVIOM16/o-Y1
Dn/Up - Aviom
Up/Dn - 16 ch
Mode Up/Up - 8 ch
Dn/Dn - Test
1 2 3 4 5 6 7 8 9 10
Stereo Link | |
|
Made in USA
1 | 2 | 3 | 4 | 5 |
1Thumb Screws
2DIP Switch - Stereo Link
3DIP Switch - Mode Selection
4
5Locking EtherCon RJ45 connector with release tab
Installing the Y1 Card
The Y1 card can be used in any expansion slot in the Yamaha mixing console. The number of available expansion slots varies with each model. In the Yamaha user interface, the expansions slots are identified by number, starting with “1”.
Align sides of Y1 card with guides in the expansion slot.
Thumb screws
To install the Y1 card:
•Start with the power to the Yamaha mixing console off.
•Remove the mixer’s power cord from the wall receptacle.
•Remove the cover plate on the rear of the Yamaha
