Aviom 16/O-Y1 manual

!Warning

Failure to observe the following warnings may lead to risk of serious injury from fire or electric shock.

Before installing the card, you must refer to the owner’s manual of the host device or to the Yamaha website to verify that your host device supports this card, and to verify the number of cards that can be installed in combination with other Yamaha or third-party cards.

• Do not attempt to disassemble or modify the card. Do not apply excessive force to board connectors or other board components. (Mishandling the board may lead to shock, fire hazard, or equipment failure.)

• You must turn off the power of your device before you begin installing the AVIOM16/o-Y1 card.

• Be sure to disconnect the power cable from the main unit before installing this card (to eliminate shock hazard).

! Caution

Failure to observe the following precautions may lead to personal injury, or may result in damage to equipment or other property.

•Do not touch the board’s metallic leads (pins) when handling the card. (Pins are sharp and may cause hand cuts.)

•The card is electrostatic-sensitive. Before handling the card, you should briefly touch the main unit’s metal casing with your bare hand so as to drain off any static charge from your body.