CONDITION | ACTION | NOTES AND COM- |
|
| MENTS |
Requires routine cleaning | Mild detergent solution ap- | If possible use warm to |
| plied with soft sponge or | |
| cloth. Rinse and wipe dry. | tion of ammonia is benefi- |
|
| cial. |
|
|
|
Finger prints | Minimize | |
| alcohol or an organic sol- | applying a wax or silicone |
| vent. Follow immediately | based household polish to |
| with routine cleaning. | the clean dry surface. |
| Wipe with a little baby oil | Apply whenever necessary. |
| and a soft lint free cloth. |
|
| Buff to shine. |
|
Stubborn stains and | Use a little Ceran cleaning | Repeat several times rather |
discolouration | paste. (available from Defy | than resorting to a single |
| Service Centres). | aggressive cleaning method. |
| Rinse and dry. |
|
|
|
|
Grease and fat splatter. | Wipe off excess with a soft |
|
| cloth or paper towel. Use a |
|
| water borne degreasing |
|
| agent ( dishwashing liq- |
|
| uid ).Follow up by routine |
|
| cleaning. |
|
|
|
|
Scratches on the brushed | For slight scratches, use a | Deep scratches will be diffi- |
finish. | nylon pad loaded with an | cult to remove completely. |
| iron free abrasive polishing | Do not use steel wool or |
| compound. Follow the direc- | metal scourers unless they |
| tion of the original texture. | are made from stainless |
| Follow up with routine | steel. |
| cleaning. |
|
| For deep scratches use a |
|
| coarser abrasive initially and |
|
| follow up as for light |
|
| scratches. |
|
|
|
|
It must be appreciated that some of the above suggested procedures will alter the surface appearance of the treated area.
They should therefore only be applied with due consideration and care.
14
