Maintenance
Lift-off oven door
The oven door may be removed to improve oven access during cleaning
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Grasp the open door on |
| Flip the retainer clasps up |
| ||
both sides near the hinges |
| and over the hook on the |
| ||
|
| upper hinge arm . |
| ||
|
| Maintain upward pressure |
| ||
|
| on the door to prevent the |
| ||
|
| clasps from disengaging |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
Removing the inner door glass.
•The glass may be removed for cleaning pur- poses by removing the two screws which hold it in place.
•It is now possible to clean the inside of the outer glass if required.
•Wash the glass in hot soapy water, rinse and dry.
•
“THIS SIDE TOWARDS OVEN”.
•
Lift the door upwards and outwards until it is free of the hinge housing
After cleaning ,refit the door
in reverse order.
Removing the side racks and shelves
• The side racks and shelves may be removed for cleaning purposes.
• Remove the bottom bake element guard.
• Slide the shelf out fully against the shelf stop.
• Lift the shelf slightly and slide it out
•The side racks may be removed by pulling the bot-
tom stay slightly downwards thereby dislodging it from the retainer at the bottom centre. Lift the racks free of the retaining slots in the oven wall.
• Replace in reverse order of disassembly.
11