CONDITION | ACTION | NOTES AND |
|
| COMMENTS |
Requires routine cleaning Mild detergent solution applied with soft sponge or cloth. Rinse and wipe dry.
Finger prints | |
| alcohol or an organic solvent. |
| Follow immediately with routine |
| cleaning |
| Wipe with a little baby oil and a |
| soft lint free cloth. Buff to shine |
If possible use warm to hand- hot water. A 5% addition of ammonia is beneficial.
Minimize
Apply whenever necessary
Stubborn stains and | Use a little Ceran cleaning paste. |
discolouration | (available from Defy Service |
| Centres) |
| Rinse and dry. |
Grease and fat splatter. | Wipe off excess with a soft cloth |
| or paper towel. Use a water borne |
| degreasing agent (dishwashing |
| liquid). Follow up by routine |
| cleaning. |
Repeat several times rather than resorting to a single aggressive cleaning method
Scratches on the brushed For slight scratches, use a nylon
finish.pad loaded with an iron free abrasive polishing compound. Follow the direction of the original texture. Follow up with routine cleaning. For deep scratches use a coarser abrasive initially and follow up as for light scratches,
Deep scratches will be difficult to remove completely. Do not use steel wool or metal scourers unless they are made from stainless steel.
It must be appreciated that some of the above suggested procedures will alter the surface appearance of the treated area.
They should therefore only be applied with due consideration and care.