7 Technical specifications
Models (EN) | DAW 369 | DAW 370 |
|
|
|
Maximum dry laundry capacity (kg) | 6 | 6 |
|
|
|
Height (cm) | 84 | 84 |
|
|
|
Width (cm) | 60 | 60 |
|
|
|
Depth (cm) | 48 | 48 |
|
|
|
Net weight (±4 kg.) | 59 | 59 |
|
|
|
Electrical input (V/Hz) | 220 V / 50Hz | 220 V / 50Hz |
|
|
|
Total current (A) | 10 | 10 |
|
|
|
Total power (W) | 2000 | 2000 |
|
|
|
Spin speed (rpm max.) | 1000 | 1000 |
|
|
|
Standby mode power (W) | 1.40 | 1.40 |
|
|
|
Offmode power (W) | 0.20 | 0.20 |
|
|
|
Single water inlet/Double water inlet | • / - | • / - |
|
|
|
• Available |
|
|
The manufacturer strives for continuous improvement. For this reason, technical specifications, text and illustrations in this manual are subject to change without notice.
Figures in this manual are schematic and may not match your machine exactly.
Values stated on the machine labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary.
8 Trouble shooting
Programme cannot be started or selected.
•Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Cancelling the programme")
Water in the machine.
•Some water might have remained in the product due to the quality control processes in production. >>> This is not a failure; water is not harmful to the machine.
Machine vibrates or makes noise.
•Machine might not be levelled. >>> Adjust the feet to level the machine.
•A hard substance might have entered into the pump filter. >>> Clean the pump filter.
•Transportation safety bolts are not removed. >>> Remove the transportation safety bolts.
•Laundry quantity in the machine might be too little. >>> Add more laundry to the machine.
•Machine might be overloaded with laundry. >>> Take out some of the laundry from the machine or distribute the load by hand to balance it homogenously in the machine.
•Machine might be resting on a rigid item. >>> Make sure that the machine is not resting on any obstructions or rigid items.
PAGE 21
