Reversing the oven door to open from the other side ( optional)
This task will require an assistant to hold and support the door during the changeover
A
1Open the oven door and using a suitable Allen key, remove the
two hinge mounting cover plates (A) located at the top and bottom of the right hand oven flange.
2 | B |
While holding and supporting the door weighing 7.4kg, |
remove the hinges (B) at the left hand oven flange.
DO NOT REMOVE OR LOOSEN THE STAR SCREW IN
THE CENTRE
3Using a size 10 spanner, loosen the locknut ( C ) on the door lock pin .
Then holding the pin by the head, (D), unscrew it from the right hand oven flange.
4 Screw the pin into the centre position of the left hand oven flange and fasten the lock nut.
5 | Turn the door through 180 degrees so that the bottom is now on |
| top. |
6 | While supporting the door, secure the hinges (B) at the vacated |
| positions (top and bottom) of the right hand oven flange. |
7 | Fit the hinge mounting cover plates (A) at the vacated positions |
| (top and bottom) of the left oven flange. |
C D
8 | Loosen nut ( C) and adjust the hinge pin (D) by turning it in or |
|
|
|
| C |
|
|
| ||||
| out until the oven door shuts properly. Thereafter tighten the |
|
|
|
| D |
|
|
|
|
| ||
| lock nut ( C ) once more. |
|
|
|
| |
|
|
|
|
|
| |
| Should you experience difficulty in aligning the door to the |
|
|
|
|
|
9 | locking pin, loosen the star screw (E) and Allen screws (F) |
|
|
|
|
|
slightly. (DO NOT REMOVE)) | F | E | F | |||
The door can then be maneuvered left to right and top to bottom to perfect the alignment. Thereafter tighten all the screws.
Should the procedure described above prove to be onerous, a Defy technician can perform the adjustment at the standard
PAGE 5 OF 12
