Operation
•Select the fan speed you require.
•Push button ‘3’ for high extraction level.
•Push button ‘2’ for medium.
•Push button ‘1’ for low.
•The fan indicator light will glow when the fan is operating.
•To switch the fan off, push the fan speed OFF button ‘0’.
•If required, you may illuminate the cooking area by switching the hood lights on.
•Leave the hood running for a short period after the cooking has been completed to clear any smoke and odours.
Replacing the light bulbs
•Switch off the electricity supply.
•If the bulb has recently failed, it might still be very hot. Allow the glass cover to cool before attempting to replace the bulb.
•Hold the glass cover and unclip the retaining ring. Be careful not to let the glass cover fall.
•Replace the light bulb with a commercially available G9 220V 25W halogen or equivalent bulb.
•Take care not to handle the replacement bulb with bare fingers as transferred skin oil may shorten the life expectancy of the halogen bulb.
•Fit the glass cover in the retaining ring, align the 3 clips to the slots and clip back into place.
•Switch on the electricity supply.
Figures in this manual are schematic and may not exactly match your product.
Page 9
