ENGLISH |
MODEL
HT-SB40
SOUND BAR HOME THEATER SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.
Note:
This product is recommended for flat panel TV (LED, LCD and plasma).
Accessories
The following accessories are included.
Remote Control | Subwoofer Stand x 2 | Audio Cable x 1 | HDMI Cable x 1 |
(RRMCGA297AWSA) | (GITAUA022AW01) | (QCNWGA087AWPZ) | (QCNWGA078AWPZ) |
Pattern Paper | Quick Start Guide |
|
|
(TCAUHA034AWZZ) | (TINSZB421AWZZ) |
|
|
Printed in Malaysia
Special Notes
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK).
NO
Explanation of Graphical Symbols:
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
FOR YOUR RECORDS
For your assistance in reporting this unit in case of loss or theft, please record below the model number and serial number which are located on the rear of the unit. Please retain this information.
Model number ........................................................
Serial number ........................................................
Date of purchase ........................................................
Place of purchase ........................................................
NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
WARNING
FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
FCC Radiation Exposure Statement
This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. It must not be
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles.)
IC Radiation Exposure Statement (For users in Canada)
The radio communications device incorporated into this apparatus meets all requirements of the Industry Canada Radio Frequency Exposure Rules
Operation is subject to the following two conditions:
1.This device may not cause harmful interference, and
2.This device must accept any interference received, including interference that may cause undesired operation.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles.)
Note to CATV system installer:
This reminder is provided to call the CATV system installer’s attention to Article 820 of the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
ENERGY STAR® Program Information
Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy efficiency.
ENERGY STAR® is a U.S. registered mark.
Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol,
&DTS and the Symbol together are registered trademarks & DTS Digital Surround and the DTS logos are trademarks of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
Manufactured under license from Dolby Laboratories. Dolby and the
HDMI, the HDMI Logo, and
Important Safety Instructions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of this product, please read the following precautions carefully before use.
1)Read these instructions.
2)Keep these instructions.
3)Heed all warnings.
4)Follow all instructions.
5)Do not use this apparatus near water.
6)Clean only with dry cloth.
7)Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8)Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including Amplifiers) that produce heat.
9)Do not defeat the safety purpose of the polarized or
10)Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
11)Only use attachments/accessories specified by the manufacturer.
12)Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from
13)Unplug this apparatus during lightning storms or when unused for long periods of time.
14)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
Additional Safety Information
15)Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For product intended to operate from battery power, or other sources, refer to the operating instructions.
16)Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
17)Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or
To prevent fire or shock hazard, do not expose this appliance to dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus.
18)Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
a)When the AC cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c)If the product has been exposed to rain or water,
d)If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation,
e)If the product has been dropped or damaged in any way, and
f)When the product exhibits a distinct change in performance - this indicates a need for service.
19)Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
20)Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
21)Wall or ceiling mounting - When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.
22)Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
23)Protective Attachment Plug - The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
24)Stand - Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
For U.S. customer only
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section |
|
Your Product Model Number & Description: | |
| (Be sure to have this information available when you need |
| service for your Product.) |
Warranty Period for this Product: | One (1) year parts and labor from the date of purchase. |
Additional Item(s) Excluded from Warranty Coverage | |
(if any): | items. |
Where to Obtain Service: | At a Sharp Authorized Servicer located in the United States. |
| To find a location of the nearest Sharp Authorized Servicer, |
| call Sharp toll free at |
What to do to Obtain Service: | Ship prepaid or carry in your Product to a Sharp Authorized |
| Servicer. Be sure to have Proof of Purchase available. If |
| you ship the Product, be sure it is insured and packaged |
| securely. |
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey
TINSZB422AWZZ |
| 13A R KI 1 |
|
Precautions
General
●Please ensure that the equipment is positioned in a
4" (10 cm) | 4" (10 cm) |
4" (10 cm) | |
| 4" (10 cm) |
4" (10 cm) | 4" (10 cm) |
| 4" (10 cm) |
●Use the unit on a firm, level surface free from vibration.
●Keep the unit away from direct sunlight, strong magnetic fields, excessive dust, humidity and electronic/electrical equipment (home computers, facsimiles, etc.) which generate electrical noise.
●Do not place anything on top of the unit.
●Do not expose the unit to moisture, to temperatures higher than 140°F (60°C) or to extremely low temperatures.
●If your system does not work properly, disconnect the AC power cord from the AC outlet and replug.
●In case of an electrical storm, unplug the unit for safety.
●Hold the AC power plug by the head when removing it from the AC outlet, as pulling the cord can damage internal wires.
●The AC power plug is used as a disconnect device and shall always remain readily operable.
●Do not remove the outer cover, as this may result in electric shock. Refer internal service to your local SHARP service facility.
●This unit should only be used within the range of 41°F - 95°F (5°C - 35°C).
●SHARP is not responsible for damage due to improper use. Refer all servicing to a SHARP authorised service center.
Warnings:
●The voltage used must be the same as that specified on this unit. Using this product with a higher voltage other than that which is specified is dangerous and may result in a fire or other type of accident causing damage. SHARP will not be held responsible for any damage resulting from use of this unit with a voltage other than that which is specified.
●In case of repairing, please bring the entire system set to the service center.
Volume control
The sound level at a given volume setting depends on speaker efficiency, location and various other factors. It is advisable to avoid exposure to high volume levels, which occurs while turning the unit on with the volume control setting up high, or while continually listening at high volumes.
Controls and indicators (continued)
Display |
| Subwoofer |
FRONT VIEW | REAR VIEW |
1 | 2 |
|
|
DIGITAL |
| 1 |
|
|
|
| |
| 3 |
|
|
DIGITAL |
| 3 |
|
|
|
| |
|
| 2 |
|
|
| Reference Page |
|
1. Dolby Digital Indicator | . . . . . . . . . . . . 13 |
| |
2. DTS Indicator | . . . . . . . . . . . . 13 |
| |
3. Muting Indicator | . . . . . . . . . . . . 12 | 4 | |
|
|
| A C I N P U T |
|
|
| 5 |
|
|
| Reference page |
|
| 1. Power/Pairing Indicator . . | . . . . . . . . . . . . . . . . . . 11 |
|
| 2. Bass Reflect Duct |
|
|
| 3. Woofer |
|
|
| 4. Pairing button | . . . . . . . . . . . . . . . . . . 11 |
|
| 5. AC Power Cord | . . . . . . . . . . . . . . . . . . . 8 |
Sound Bar Rear Panel
Controls and indicators (continued)
1 |
|
|
2 |
| 14 |
3 |
|
|
4 |
| 15 |
|
| 16 |
5 |
| 17 |
6 |
| 18 |
7 | AUDIO | |
|
| 19 |
8 |
| 20 |
9 |
|
|
10 |
| 21 |
11 |
| 22 |
|
| |
12 |
| 23 |
13 |
| 24 |
|
| 25 |
Remote Control
Reference page 1. Remote Control Transmitter . . . . . . . . . . . . . . . . 11
2. TV ARC Button. . . . . . . . . . . . . . . . . . . . . . . . . 9, 13
3. Music (Sound Mode) Button . . . . . . . . . . . . . . . . 12
4. Cinema (Sound Mode) Button . . . . . . . . . . . . . . 12
5. Sport (Sound Mode) Button . . . . . . . . . . . . . . . . 12
6. BYPASS Button . . . . . . . . . . . . . . . . . . . . . . . . . . 12
7. 3D AUDIO Button . . . . . . . . . . . . . . . . . . . . . . . . . 13
8. APC Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
9. TV Operation Button . . . . . . . . . . . . . . . . . . . . . . 13 10. AV SYNC Down Button . . . . . . . . . . . . . . . . . . . . 13
11. Source Button . . . . . . . . . . . . . . . . . . . . . . 9, 10, 13
12. Subwoofer Level Down Button. . . . . . . . . . . . . . 12
13. Bass Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
14.
19. Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
20. MUTE/Speaker Output Selection
Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12, 13
21. AV SYNC Up Button . . . . . . . . . . . . . . . . . . . . . . 13
22. Volume Up Button . . . . . . . . . . . . . . . . . . . . . . . . 12
23. Subwoofer Level Up Button . . . . . . . . . . . . . . . . 12
24. Treble Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
25. Volume Down Button. . . . . . . . . . . . . . . . . . . . . . 12
Sound bar preparation
To mount the sound bar on the wall | Installing the sound bar |
Caution: | 1 Tighten the screws and remove the paper. Hook |
● Be very careful to prevent the sound bar [7.27 lbs. (3.3 kg)] | |
from falling when mounting on the wall. | the speaker on the screw heads and make sure it |
● Before mounting, check the wall strength. (Do not put on | is properly secured. |
the veneer plaster or whitewashed wall. The sound bar |
|
may fall.) If unsure, consult a qualified service technician. |
|
● Mounting screws are not supplied. Use appropriate ones. |
|
● Check all wall mount angle screws for looseness. |
|
● Select a good location. If not, accidents may occur or |
|
the sound bar may get damaged. |
|
● SHARP is not responsible for accidents resulting |
|
from improper installation. |
|
Driving screws | Wall |
SHARP designed the sound bar so you may hang them on | surface |
| |
the wall. Use proper screws (not supplied). See below for |
|
size and type. |
|
| 1/8" (3.2 mm) | Falling prevention |
3/16" |
| |
|
| |
(5 mm) | 3/8" (9 mm) | Safety wires (not supplied) are useful to prevent the sound |
|
| |
| 7/8" (Min. 22 mm) | bar from falling off the table. |
Fixing wall mount angle (Horizontal position)
1 Fix the pattern paper to the wall in horizontal position as below.
Wall surface
548 mm
Controls and indicators
1 | 2 |
3 4 5 6 78 9 10
Sound Bar Front Panel
1. Left Channel Speakers | Reference page |
| Reference page |
| 6. Remote Sensor | . . . . . . . . . . . .11 | |
2. Right Channel Speakers |
| 7. Demo Indicator | . . . . . . . . .11, 15 |
3. | . . . . . . . . 11, 14 | 8. Sound Mode Button | . . . . . . . . .12, 14 |
4. SOURCE Button | . . . . . . 9, 10, 13 | 9. Volume Down Button | . . . . . . . . . . . .12 |
5. Pairing Button | . . . . . . . . . . . 11 | 10. Volume Up Button | . . . . . . . . . . . .12 |
| 6 5 |
|
|
| 4 | 3 | 2 |
|
| ||
|
| 1 |
|
| Reference page |
| Reference page |
1. HDMI OUT (TV ARC) Jack | . . . . . . . . . . . 9 | 4. Optical IN Jack | . . . . . . . . . . . . . . . 10 |
2. HDMI IN 1 Jack | . . . . . . . . . . . 9 | 5. Audio IN Terminal | . . . . . . . . . . . . . . . 10 |
3. HDMI IN 2 Jack | . . . . . . . . . . . 9 | 6. AC Power Cord | . . . . . . . . . . . . . . . . 8 |
TV Operation Buttons (Only SHARP TV):
Sets the TV | Input Select | Press the | ||||||
Button | power to | Button (TV) | button to | |||||
| “ON” or |
|
|
|
|
|
| switch the |
|
|
|
|
|
|
| input source. | |
|
|
|
|
|
|
|
|
|
Channel Up | Switch up/ | Volume Up | Turn up/ | |||||
and Down | down the TV | and Down | down the TV | |||||
Buttons | channels. | Buttons | volume. | |||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Note:
Some models of SHARP TV may not be operable.
Pattern paper
2Make a hole on the wall following the screw point marks on the pattern paper by using a drill.
3/8" 
Wall surface 
3Fix a wall mount plug (not supplied) into the hole using a hammer, until it is flush with the wall surface.
3/8" 
Wall surface 
4Fix screws into the wall for the speaker, as shown in the illustration.
●Make sure that the screw and the wall can support a load of 20 kg (45 lbs).
●Fix the screws, so the screw head extends about 5.5 mm (7/32") from the wall.
5.5 mm (7/32")
Wall surface Wall | Wall surface |
mounting |
|
screw |
|
Wall mount set up
Safety screw (not supplied)
Safety wires
Wall 
Sound bar unit
Desktop set up
Sound bar unit
Rack/ | Safety | Safety | |
wires | screw | ||
table | |||
| (not | (not |
Safety supplied) supplied) screw
(not
supplied)
Placing the system
System connections (continued)
Audio connections to TVs, DVD players, VCRs, etc.
Remote control | General control |
Installation image: | Notes: |
● The front panel of the sound bar is not removable.
● The transmission distance of the wireless signal between the subwoofer and sound bar is about 32 feet (10 m), but
TV | may vary depending on your operating environment. If a |
| |
| |
| and the sound bar, the system may not operate at all, |
| because the wireless signal cannot penetrate metal. |
|
| Caution: |
|
| ● Do not change the installation direction when the sound |
|
| bar is turned on. |
|
| ● Do not stand or sit on the sound bar and subwoofer as |
|
| you may be injured. |
| Sound Bar | Placing the stand |
|
| Place the stand as shown. |
VCR | DVD player | Subwoofer |
Place the system as shown.
Remove the protective film covering the sound bar and subwoofer before turn on the system.
Stand
System connections
Make sure to unplug the AC power cord before making any connections.
Subwoofer |
HDMI Connection
Caution:
Turn off all other equipment before making this connection.
The illustration below shows the flows of the signals.
Audio and Video signal
TV
Digital tuner 1. Method 1
This connection is for HDMI TV with ARC (Audio Return Channel).
TV | DVD, | |
| player or similar | |
To HDMI (TV ARC) input | To HDMI output | |
terminal | ||
terminal | ||
|
Sound Bar
To HDMI OUT (TV ARC) output terminal | To HDMI input terminal |
2. Method 2
This connection is for HDMI TV without ARC (Audio Return Channel).
To HDMI input terminal | TV |
| |
To audio output terminal | DVD, |
player or similar | |
To Headphone | To HDMI output |
terminal | terminal |
Other connection (without HDMI)
The illustration below shows the flows of audio and video signals.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| TV | |||||||
|
|
|
|
|
| Audio signal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||
|
|
|
|
|
| Video signal |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Disc Player | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Digital tuner, etc.
Notes:
●Refer to the operation manual of the equipment to be connected.
●Fully insert the plugs to avoid fuzzy pictures or noises.
●Connecting via this method may disable TV internal speakers.
●In some cases, a small background noise could emit from the sound bar, when you use the RCA audio output terminal connection from a
Connecting a TV, or DVD player, etc.
Connect to the TV using an optical digital cable or an audio cable.
TV
| To audio output terminals |
or | To |
HEADPHONE | |
| terminal |
Audio |
Battery installation
Use 1 “AA” size battery
1Open the battery cover.
2 Insert the batteries according to the direction indicated in the battery compartment.
When inserting or removing the battery, push them
toward the 
battery terminals.
3Close the battery cover.
Caution:
●Remove the battery if the sound bar will not be used for a long period of time. This will prevent potential damage due to battery leakage.
●Do not use rechargeable battery
●Installing the battery incorrectly may cause the sound bar to malfunction.
●Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
Notes concerning use:
●Replace the battery if the operating distance is reduced or if the operation becomes erratic.
●Periodically clean the transmitter on the remote control and the sensor on the sound bar with a soft cloth.
●Exposing the sensor on the sound bar to strong light may interfere with operation. Change the lighting or the direction of the sound bar.
●Keep the remote control away from moisture, heat, shock, and vibrations.
AUDIO
Make sure to enable the HDMI CEC when making HDMI connection. For details, refer to the operation manual of the TV.
To turn the power on
Press the
●The power turns on and the subwoofer indicator turns blue. If the power does not turn on, check whether the AC power cord is plugged in properly.
●The system will automatically power on if TV or similar component which supports HDMI CEC, is turned on.
To set the sound bar to
Press the
Notes:
●A slight audio delay after TV is turned ON does not mean that the system is faulty. This is normal.
●“AQUOS speaker is enabled” message will be displayed if SHARP LCD TV does not detect
| Sound Bar |
AC outlet | AC outlet |
AC 120 V ~ 60 Hz | AC 120 V ~ 60 Hz |
AC INPUT |
|
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
Sound bar and Subwoofer connection
Caution
●Do not allow any objects to fall into or to be placed in the bass reflex duct.
●Do not stand or sit on the sound bar/subwoofer. You may be injured.
To HDMI OUT (TV ARC) output terminal | Sound Bar | To HDMI input terminal |
|
To select HDMI 1, 2 or TV ARC function (Source):
Press SOURCE button repeatedly until “HDMI 1”, “HDMI 2” or “TV ARC” appears on the display, or press TV ARC button on the remote control to select the TV ARC.
Notes:
●This sound bar supports HDMI which enables ARC (Audio Return Channel).
●To enable ARC make sure to use High Speed HDMI™ cable (with ARC).
●This ARC feature requires TV that supports ARC. Refer the operation manual of the TV to determine which terminal supports ARC.
●To listen to the sound from a
●This sound bar can be operated (power on/off or volume up/down) via a TV or similar component which supports HDMI CEC (Consumer Electronics Control). If this does not work, it does not mean this system is faulty. Refer to the operation manual of the respective component on how to activate the CEC.
Example: Go to the Menu of the component to search and enable the CEC. Different brands may have different naming for the CEC. For SHARP LCD TV, it is named as AQUOS LINK.
●CEC is not available during Low power consumption mode.
●To listen to the sound from this system, you will need to press and hold the 
(MUTE) button (refer page 13) or adjust the speaker output settings within the TV menu.
For details, refer to the operation manual of the TV.
●If you are unable to select external speaker setting from the TV menu (E.g. For SHARP LCD TV, it is named as AQUOS AUDIO SP), turn the CEC OFF and ON again.
●To enjoy 3D images, this system must be connected to a
●If you want to use HDMI IN 1 jack, please use the supplied HDMI cable.
DVD player/Digital |
| To optical |
|
| ||
| digital audio | signal | ||||
Tuner |
| |||||
| output | |||||
|
|
|
| |||
|
|
|
| terminal | ||
Optical digital |
|
|
| Audio cable | ||
audio cable |
|
|
|
|
| (commercially |
|
|
|
| |||
(commercially |
|
|
| available) | ||
available) |
|
|
|
| ||
To AUDIO IN
To OPTICAL 
input terminals IN (optical) 
input terminal
Sound Bar
To select OPTICAL function:
Press SOURCE button repeatedly until “OPTICAL” appears on the display.
To select AUDIO IN function:
Press SOURCE button repeatedly until “AUDIO IN” appears on the display.
Test of the remote control | Demonstration mode |
Point the remote control directly at the remote sensor on | ● The first time the unit is plugged in, the unit will enter | |
the sound bar. | the demonstration mode. | |
The remote control can be used within the range | ● To cancel the demonstration mode, press the DEMO | |
shown below: | button on the remote control during power | |
mode. | ||
| ||
Remote sensor | ● To enter to the low power consumption mode, press | |
and hold the DEMO button (Demo indicator turns off). | ||
|
|
| Connecting the wireless Subwoofer | |
|
| The sound bar and subwoofer will link automatically | |
|
| (wirelessly) when turned on as it is already | |
8" - 20' |
| the factory. If the link cannot be established, please set the | |
| connection by the following method. | ||
(0.2 m - 6 m) | 15° 15° | ||
1. Press and hold the PAIRING button on the sound bar for | |||
| |||
|
| more than 3 seconds. | |
|
| 2. Within 2 minutes, press and hold the PAIRING button on | |
|
| the subwoofer for more than 3 seconds. | |
|
| ● During pairing process: | |
|
| On sound bar: “PAIRING” will blink. | |
|
| On subwoofer: indicator will blink in blue. |
General control (continued)
●When pairing is successful:
Muting
General control (continued) |
|
| General control (continued) | |||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Troubleshooting chart
Many potential problems can be resolved by the owner without
Maintenance
Specifications
As part of our policy of continuous improvement, SHARP
On sound bar: | “PAIRING” disappears. |
On subwoofer: | indicator turns blue. |
| Subwoofer |
Sound Bar |
|
Notes:
●If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4GHz frequency near the system, some sound interruption may be heard due to interference.
●The transmission distance of the wireless signal between the subwoofer and sound bar is about 32 feet (10 m), but may vary depending on your operating environment. If a
Caution:
●Keep the subwoofer away from water and moisture.
●To get the optimum listening performance, make sure the area around the sound bar and subwoofer is clear of any obstacles.
Display brightness control
Press the DIMMER button to adjust the brightness of the display.
Dimmer 1 (Display is dim)
Dimmer 2 (Display gets dimmer)
The volume is muted temporarily when pressing the 
(MUTE) button on the remote control. Press again to restore the volume.
Note:
When the sound bar is turned off and back on again, muting is canceled.
Sound Mode
Sound bar operation:
To change to a different mode, press the SOUND MODE button repeatedly until the desired sound mode is displayed.
Remote control operation:
Press the desired sound mode button on the remote control.
CINEMA | (for cinema sound effect) |
|
|
MUSIC | (for standard sound effect) |
|
|
GAME | (for game sound effect) |
|
|
SPORT | (for sport broadcasting) |
|
|
NEWS | (for news) |
|
|
NIGHT | (for night) |
|
|
BYPASS | (for flat sound effect) |
|
|
Bass and Treble Control
Bass and Treble control is applicable during BYPASS mode only.
Bass Control
1.Press the BASS button.
2.Within 5 seconds, press the VOL (+ or
Treble Control
1. | Press the TREBLE button. | |||||||||
2. | Within 5 seconds, press the VOL (+ or | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AV SYNC level control
The AV SYNC level can be adjusted.
To increase the level, press
the AV SYNC + button. | 0 +1 ..... +3 |
To decrease the level, press the AV SYNC – button.
Speaker output selection (HDMI connection)
Press and hold 
(MUTE) button on the remote control until “TV SPEAKER” or “SB SPEAKER” appears on the display to toggle sound output between this sound bar or TV.
Function
HDMI 1 
HDMI 2 
TV ARC 
OPTICAL 
AUDIO IN
When pressing the SOURCE button, the input source will change. Press the SOURCE button repeatedly to select desired input source, or
press TV ARC button on the remote control to select TV ARC.
Note:
The backup function will protect the memorized function mode for a few hours should there be a power failure or the AC power cord becomes disconnected.
APC (Auto Power Off Control)
This sound bar can be set to turn off automatically if no signal is detected.
1.Press the APC button repeatedly to select the time.
APC 20 min 
APC 15 min
APC 5 min 
APC 10 min
2. The sound bar will enter the power |
automatically if no signal is detected after the preset |
3D sound mode
S+ 3D technology creates 3D sound through speakers regardless of the type of sound source, whether it is monaural, stereo or multichannel. It simulates sound transmission characteristics using digital signal processing to create a widening effect on the sound in the ambient space around the sound source.
By using this technology, multichannel surround sound can be produced from 2.1ch source.
Press the 3D AUDIO button repeatedly to select:
3D AUDIO 1 : Sound effect that emphasizes 3D sound.
3D AUDIO 2 : Sound effect that maintains the 3D sound and improve vocal clarity.
3D AUDIO OFF : 3D sound effect off.
This product incorporates decoders supporting the Dolby Digital system and DTS system.
DTS (Digital | One of the digital audio systems for theatrical |
Theater | use. As the sound quality is emphasized, you |
Systems) | can enjoy the realistic sound effect in the home |
| theater system. |
| Lights up when detecting DTS signal. |
Dolby Digital | One of the digital audio systems for theatrical |
| use. You can also enjoy the stereophonic effect |
| in the home theater system. |
| Lights up when detecting Dolby Digital signal. |
PCM | This is a general term for digitally encoded audio |
(Pulse Code | signals on a CD or DVD. |
Modulation) | This sound bar lets you enjoy playback of digital |
| signals from sources such as CD or DVD. |
calling a service technician.
If something is wrong with this product, check the following before calling your authorized SHARP dealer or service center.
General
Symptom | Possible cause |
|
|
● No sound is heard. | ● Is the input signal (selection) |
| set properly? |
| ● Is the volume level set to “Min”? |
| ● Is muting activated? |
| ● Is HDMI compliant equipment |
| being used? |
| ● Is the HDMI cable connected |
| correctly? |
| Connect the HDMI cable |
| correctly and then perform the |
| reset procedure. (refer this |
| page) |
| ● Do not connect or disconnect |
| an HDMI cable while power is |
| on. This may lead to operation |
| problems. |
|
|
● The sound from | ● Is the subwoofer level set to the |
subwoofer is not well | minimum or maximum level? |
balanced. |
|
|
|
● Power turns off | ● Is the HDMI cable connected |
suddenly. | correctly? Connect the HDMI |
| cable correctly and then |
| perform the reset procedure. |
|
|
● Noise is heard during | ● Move the speaker away from |
playback. | any computers or mobile |
| phones. |
|
|
● When a button is | ● Set the sound bar to the stand- |
pressed, the sound bar | by mode and then turn it back |
does not respond. | on. |
|
|
● The power is not turned | ● Is the sound bar unplugged? |
on. | ● The protection circuit may be |
| activated. Unplug and plug in |
| the power cord again after 5 |
|
|
|
|
|
|
|
|
|
| Symptom | Possible cause |
|
|
|
|
● Wireless connection | ● Make sure there is no obstacles | ||
|
| cannot be established. | (especially metal) blocking |
|
|
| between the sound bar and |
|
|
| subwoofer. |
|
|
| ● Manually |
|
|
| and subwoofer (refer page 11). |
|
|
|
|
|
| Remote control |
|
|
|
| |
Symptom | Possible cause |
|
|
● The remote control does | ● Is the battery polarity correct? |
not operate properly. | ● Is the battery dead? |
| ● Is the distance or angle |
| incorrect? |
| ● Are there any obstructions in |
| front of the sound bar? |
| ● Is there a strong light shining |
| on the remote sensor? |
| ● Is the remote control for |
| another equipment used |
| simultaneously? |
|
|
● The sound bar cannot | ● Is the AC power cord of the |
be turned on with the | sound bar plugged in? |
remote control. | ● Is the battery inserted? |
|
|
Condensation
Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet or on the transmitter on the remote control. Condensation can cause the sound bar to malfunction. If this happens, leave the power on until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the sound bar.
If problem occurs during operation
When this product is subject to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc.) or if it is operated incorrectly, it may
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth.
Caution:
●Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It may damage the cabinet finish.
●Do not apply oil to the inside of each component. It may cause malfunctions.
Error indicators and warnings
When you fail to perform operations properly, the following messages are displayed on the sound bar.
Display | Meaning |
●When there is no input signal. Play back the connected equipment.
●Nonstandard signal. Cannot be recognized.
●Signals other than DOLBY
| DIGITAL, DTS, Linear PCM |
| cannot be recognized. |
| |
(Display blinks) | ● Poor connection of the digital |
| audio input terminal. |
●Turn off the sound bar and check if the cable is connected properly.
●When the protection circuit is
activated.
Demo indicator
(blinks red)
(*): Should the same message appear even if the speaker is unplugged and plugged in, or is set to the
reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production unit. There maybe some deviations from these values in individual unit.
Sound Bar
Power source | AC 120 V ~ 60 Hz |
Power | 38 W |
consumption |
|
Dimension | Width: 37 - 1/16" (940 mm) |
| Height: 2 - 7/8" (73 mm) |
| Depth: 3 - 1/4" (83 mm) |
Weight | 7.27 lbs. (3.3 kg) |
Output power | RMS: Total 160 watts |
| RMS: |
| Front Left/Right: |
| 80 watts per channel into 4 ohms at |
| 1 kHz, 10% total harmonic distortion |
| FTC: |
| Front: (Left/Right): |
| Minimum 50 watts per channel into |
| 4 ohms at 120 Hz to 20 kHz, 1% total |
| harmonic distortion |
Output | HDMI™ output: (audio/video support up |
terminal | to 1080p) x 1 |
Input terminal | Analog input (AUDIO IN): x 1 |
| 500 mV / 47 kohms |
| Optical digital input (OPTICAL): |
| Square type x 1 |
| HDMI input: (audio/video support up to |
| 1080p) x 2 |
Type | 2 Way speaker system |
| 2 |
| 1" (2.5 cm) Soft Dome |
Maximum | 160 W |
input power |
|
Rated input | 80 W |
power |
|
Impedance | 4 ohms |
Dimmer Off (Display is bright)
the bass. |
time has elapsed. |
Notes:
Operating the TV with the remote
minutes or more. |
● 3D images not displayed ● Depending on the TV and |
malfunction.
If such a problem occurs, do the following:
Subwoofer
Power source AC 120 V ~ 60 Hz |
Volume auto |
| Subwoofer level control |
|
| |
If you turn off and on the sound bar with the volume set to | The subwoofer level can be |
|
|
| |
80 or higher, the volume starts at 40 and fades in to the last | adjusted. |
|
|
| |
set level. |
| To increase the level, press | ..... | +4 +5 | |
|
| the SW LEVEL button. | |||
|
|
| |||
Volume control |
| To decrease the level, press the SW LEVEL | button. | ||
| Notes: |
|
|
| |
|
|
|
|
| |
Sound bar operation: |
| ● When sound from the speaker is distorted, decrease | |||
Press the VOLUME + |
| the subwoofer level. |
|
|
|
button to increase the |
| ● When changing the subwoofer level, the output level of | |||
volume and the VOLUME – Min | 1 2 ..... 99 Max | the subwoofer is also changed. |
|
| |
button for decreasing. |
|
|
|
|
|
Remote control operation:
Press the VOL + button to increase the volume and the
VOL – button to decrease the volume.
●APC (Auto Power Off Control) is only applicable for TV ARC, OPTICAL and AUDIO IN input function. It will not work for HDMI 1 or HDMI 2 input function.
●This system will automatically power off if TV or similar component which supports HDMI CEC is turned off.
●During OPTICAL input function, if you mute or pause the playback (depending on the connected component), APC function wll be activated. The system will turn off after the preset time has elapse.
Audio Return Channel (ARC) (Audio Return Channel submenu)
The audio return channel (ARC) function enables an HDMI
control
You can operate Sharp TVs with this system’s remote control.
Watching TV
Point the remote control at the TV.
1Press the TV (
)
2Pressing the TV CH 
or 
button enables TV channelswitching.
3Press the TV VOL + or – button to adjust the TV volume.
Other operable button
Input Select Button
on the TV. | Video component, 3D images |
| may not be displayed. |
| Check the operation manual of |
| the respective component. |
| ● HDMI cable not support 3D |
| image. |
● Background noise | ● Please change to HDMI/ARC |
appears when | or headphone terminal from |
connecting with RCA | |
audio output terminal | Player. This effect may occur |
connection from a TV- | depending on |
set/ | Disc |
Player. | age, and it is not the sound bar |
| problem. |
● Wireless connection | ● Check the distance between |
cannot be established. | the sound bar and subwoofer |
| (less than 32 feet (10 m)). |
| ● Make sure there is no other |
| wireless devices near the unit. |
1.Set the sound bar to the
2.If the sound bar is not restored in the previous operation, unplug and plug in the sound bar again, and then turn the power on.
Factory reset, clearing all memory
Make sure to disconnect all output and input cables attached to the sound bar before performing the factory reset.
1.Press the
2.While pressing the SOUND MODE button, press and hold the
Caution:
This operation will erase all data stored in memory.
Power | 33 W |
consumption |
|
Output power | RMS: |
| 150 watts per channel into 3 ohms at |
| 100 Hz, 10% total harmonic distortion |
| FTC: |
| Minimum 110 watts per channel into |
| 3 ohms at 100 Hz, 1% total harmonic |
| distortion |
Type | Subwoofer system |
| 6 - 5/16" (16 cm) woofer |
Maximum | 300 W |
input power |
|
Rated input | 150 W |
power |
|
Impedance | 3 ohms |
Dimensions | Width: 5 - 11/16" (144 mm) |
| Height: 16 - 15/16" (430 mm) |
| Depth: 12 - 1/16" (306 mm) |
Weight | 13.42 lbs. (6.1 kg) |
12/5/2012 8:49:44 AM
