7 | Sliding Body Shelves | Chiller compartment |
|
|
|
The sliding body shelves can be removed by lifting them up slightly from the front and the shelves can then be moved back and forth. There are 2 stop points, the first allows for the shelf to be pulled to a certain point in order that foods placed at the back of the shelf may be easily accessed; when the shelf is pulled and slightly lifted upwards when it reaches the second stop point, the body shelf will be released.
The shelf should be held firmly from the bottom in order to prevent the shelf from tipping over.
The body shelf is held in place by the rails on the sides of the refrigerator body.
The shelf may be placed on one of the lower or upper level rails as required. The body shelf should be pushed backwards gently until it is completely seated.
Chiller compartments enable foods intended to be frozen become prepared for freezing. You can also use these compartments to store food at a temperature a few degrees below the fridge compartment.
You can increase the inner volume of your refrigerator by removing any of the chiller compartments.
To do this, simply pull the compartment towards yourself; the compartment will stop when it reaches the stopper.
The compartment will be released when you lift it about 1 cm and pull it towards yourself.
PAGE 16
