Defy Appliances DGS 123, DGS 122 Introduction, Unpacking, Positioning, Electrical installation

Models: DGS 122 DGS 123

1 12
Download 12 pages 36.28 Kb
Page 2
Image 2
Introduction.

Introduction.

Congratulations on the purchase of this quality product.

We trust that you will enjoy many years of trouble free use.

Please read these instructions carefully before use as they will pro- vide you with information on how to operate and care for your stove in order that you gain the maximum benefit from it.

Unpacking.

Please ensure that packaging material is disposed of in a responsible manner.

Plastic bags should be cut up to prevent children playing with them and accidentally suffocating.

If the appliance is damaged in any way, do not use it. Report the damage to your dealer, who will take the necessary corrective action.

A heat shield ( used when grilling with the oven door open) is taped to the rear of the product. This must be removed and stored for later use.

Positioning.

Room ventilation is vital for the efficient performance of the appliance and for the safety of the occupants in the room in which the appliance is installed.

Cooking appliances generate considerable heat. The layout and materials of the sur- rounding cabinets should take account of these characteristics. Surfaces of cabinets im- mediately adjacent to the stove should be able to withstand temperatures of up to 100° C without delaminating or discolouring.

Allow an unrestricted air space of at least 150mm at the sides and 750mm above the stove.

The stove should be positioned on a stable and level surface.

The two front feet may be adjusted by turning them clockwise or counter-clockwise until the product is level and in firm contact with the floor.

Electrical installation.

This appliance must be earthed. The manufacturer and the seller do not accept responsibility for any damage due to incorrect installation or electrical connection.

This product has an electrically operated oven and an electrical connection for the flame ignition system. These require a 220V-250V. 50 Hz power supply.

The product is fitted with a 15 Amp 3 pin plug.

Insert the plug into an earthed 15 Amp wall socket.

The wall socket should be located where it is easily accessible but not above the stove.

If the mains power cord is damaged, it must be replaced by a qualified electrician.

Page 2

Page 2
Image 2
Defy Appliances DGS 123, DGS 122 owner manual Introduction, Unpacking, Positioning, Electrical installation