Gas installation.
This appliance uses LPG ( Liquid Petroleum Gas) The gas bottle must be fitted with an approved regulator. The manufacturer and the seller do not accept respon- sibility for any damage due to incorrect installation or gas connection.
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
1 | R E G U L A T O R |
|
|
|
|
|
| ||
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| |
3
1.Soak the end of the plastic hose in hot water to soften it and then push the hose end fully over the hose nozzle.
2.Secure the hose by tightening the hose clamp.
3.In a similar fashion, secure the other end of the hose to the regulator on the gas bottle.
Caution: Never use a naked flame to check for gas leaks.
•Check for gas leaks after installation and whenever a new or
•Ensure that the control knobs on the hob are in the OFF position.
•Open the valve on the gas bottle.
•Using a small paint brush, apply some soapy water to all the connections.
•If there is a leak, bubbles will appear.
•If this happens, close the valve on the gas bottle.
•Check and tighten the connections immediately.
•Repeat the procedure to ensure that there are no further leaks.
Gas conversion.
The hob can operate on both LPG (liquid petroleum gas) and Natural Gas ( Town gas). Should you require that the system be converted to operate using Natural gas, please contact the nearest Defy Service Centre.
Page 3
