Defy Appliances SBW owner manual Introduction, Unpacking, Electrical installation

Models: SB SBW

1 12
Download 12 pages 62.01 Kb
Page 2
Image 2
Introduction.

Introduction.

Congratulations on the purchase of this quality product.Unpacking.Electrical installation.Manual background We trust that you will enjoy many years of trouble free use. Please Manual backgroundManual backgroundManual backgroundManual background read these instructions carefully before using the stove. This manual Manual backgroundManual background will provide you with information on how to operate and care for your

product in order that you gain the maximum benefit from it.

Unpacking.

Please ensure that packaging material is disposed of in a responsible manner.

Plastic bags should be cut up to prevent children playing with them and accidentally suffocating.

Please ensure that packaging material is disposed of in a responsible manner. Plastic

Remove all packing from the oven cavity and position the accessories.

bags for example should be cut up to prevent children playing with them and acciden-

If the appliance is damaged in any way, do not use it. Report the damage to your tally suffocating.

dealer, who will take the necessary corrective action.

If the appliance is damaged in any way, do not use it. Report the damage to your Installationdealer, who will take.the necessary corrective action.

Levelling feet are provided at each corner. Adjustments may

be made by tilting the stove and turning the feet in or out un- til the stove stands firm and level.

Surfaces immediately adjacent to the oven should be able to withstand temperatures of up to 100°C without delaminating or discolouring.

Use of the splash panel is optional. The splash panel is

packed separately and may be fitted as shown. First care- fully prise off the dome shaped plastic covers at the rear end of the hob. Remove the screws and dispose of the domes and retainer pieces. Hold the splash panel in position, insert the screws and finger tighten ( to avoid cross threading) be- fore final tightening with a screw driver.

Electrical installation.

“This appliance must be earthed and the manufacturer and the seller do not accept responsibility for any damage due to incorrect installation or electrical connection.”

This appliance should not be connected through an earth leakage system. Refer to S.A.B.S. 0142.

Connection to the power supply must be carried out by a licensed electrician, who will ensure that the oven is correctly connected and safely earthed. The rated current is printed on the serial number label attached to the back of the stove.

The appliance must be connected to the mains through a double pole isolating switch which has a minimum clearance between the contacts of 3 mm. in both poles. A means for disconnection must be provided in the fixed wiring.

Page 2

Page 2
Image 2
Defy Appliances SBW owner manual Introduction, Unpacking, Electrical installation