Delfield F18RC52 specifications F18RC Reduced, Contained Prep Table, Height Raised Rail Self

	Project ___________________________________
	Item _____________________________________
	Quantity _ ________________________________
F18RC	CSI Section 11400
	Approved _ _______________________________
	Date _____________________________________
Reduced Height Raised Rail Self-Contained Prep Table

Models

•F18RC52 52” reduced height raised rail self-contained prep table

•F18RC60 60” reduced height raised rail self-contained prep table

•F18RC68 68” reduced height raised rail self-contained prep table

•F18RC82 82” reduced height raised rail self-contained prep table

•F18RC91 91” reduced height raised rail self-contained prep table

•F18RC99 99” reduced height raised rail self-contained prep table

F18RC: Reduced

F18RC60

(Shown will optional stainless steel finished end.)

Standard Features

•16 gauge stainless steel top

•High density environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane foam insulation throughout unit

•Snap-in dart style vinyl magnetic gasket

•Recessed black plastic handle held in with a positive lock system

•14 gauge leg rails that run the entire length of the unit

•6.12” adjustable full stainless steel legs and bullet feet

•8’ cord and plug

•36” standard work height

•Environmentally friendly HFC-404A refrigerant

•One year parts and 90 day labor standard warranty

Options &

Accessories

•Stainless steel end

•Stainless steel back

•Laminate facing (full front)

•Laminate end

•Laminate back

•Cutting board (Sanalite or composite)

•Tray rack

•Casters

•Drawers, (2 or 3 high) 19”, 27” or 32” drawers in lieu of one door

•Locks

•Cold pan drain

•220V/50 cycle

Height Raised Rail Self

Specifications

Exterior top is one-piece, 16-gauge stainless steel, with integral 2.12” (5.4cm) high square nosing on front. Top has a mechanically cooled refrigerated raised rail at rear with openings to accommodate 1/6 size pans. Pans and adapter bars are provided by others. Pans are recessed 2” (5.1cm). Rail interior is 22-gauge stainless steel. Raised rail openings have 18-gauge stainless steel removable lids. Unit is equipped with separate expansion valve and on/off switch for refrigerated cold pan. Temperature in top opening to maintain 33°F (1°C) to 41°F (5°C) with pans recessed 2” (5.1cm) at 86° ambient room temperature, meeting NSF7 requirements.

Exterior Back and Bottom are 24-gauge galvanized steel. Exterior ends are finished with 18-gauge galvanized steel.

Base Interior has 22-gauge stainless steel back and bottom. Base interior ends and door frames are thermoformed ABS plastic. Base is insulated with 1.5” (3.8cm) high density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane. End of base has a machine compartment, standard on right, with condensing

unit installed.

Door(s) have a 22-gauge stainless steel exterior front, with thermoformed ABS plastic interior liner, black recessed handle and snap in magnetic gasket which is easily replaceable. Each interior door section has (1) removable epoxy coated wire shelf.

Refrigeration System uses HFC-404A refrigerant. Cabinet has a blower coil assembly with expansion valve located behind door mullion. Base is equipped with independently controlled thermostat, solenoid valve and condensate evaporator. On/off switch for unit is located on panel above louver. Refrigeration system in the base will maintain 36°F (2°C) to 40°F (4°C).

Legs: Unit is mounted on 6.13” (15.6cm) high adjustable stainless steel legs.

Electrical connections are 115 volt, 60 Hertz, single phase. Unit is wired with 8’ (2.4m) cord and plug.

-Contained Prep Table

980 S. Isabella Rd.	Phone: 800-733-8948 or 989-773-7981	www.delfield.com
Mt. Pleasant, Michigan 48858
	Fax: 800-669-0619