USB SD/MultiMediaCard Reader

DDREADER-15

 

 

Formatting a MultiMediaCard

Although most cards are factory formatted, some cameras and other digital devices may require the card to be formatted in the camera or device before initial use.

Macintosh users: DO NOT format or initialize MultiMediaCards with the computer. Only format a card using the camera or SD/MMC device.

Formatting a MultiMediaCard will erase all pictures or files on the card.

Formatting should be performed in the camera or SD/MultiMediaCard device to insure compatibility.

Formatting should not be used to clear unwanted files from the card.

If you do wish to format a card with a computer, perform the following steps:.

1.In My Computer, right-click on the appropriate Removable Disk.

2.Select Format and follow on-screen instructions.

Note: a corrupt or malfunctioning MultiMediaCard can be reformatted using the CARDPREP program located in the Start/Programs/Reader-15 menu.

Operational Notes

A corrupt file on your MultiMediaCard can cause a device failure or system crash when transferring files to your computer. Recovery programs such as Scandisk can be used to detect and repair most disk errors. It may also be necessary to re-format the card, which will erase all files stored on the card. Some of the causes of file corruption are:

>Unsteady power supply while transferring files, such as a low camera battery or improperly connected reader.

>Card removed from reader or camera, or any other type of interruption while transfering or accessing files.

>Improperly formatted card.

A MultiMediaCard that cannot be accessed by the Reader-15 can be placed back in the camera, where the cameras picture viewing option can be used to determine if the card is functioning normally. If the card no longer functions in the camera, this may indicate a file corruption or other problem with the card.

Minor malfunctions while using the Reader-15, such as system hangs, can usually be resolved by simply re-booting the computer. Serious or recurring malfunctions may require a re-installation of the Reader-15 drivers.

Compatibility Note

Your new Reader is part of a system of components that must function correctly and compatibly in order to complete the simple process of moving pictures from your camera to your computer. The components involved are the Reader, Camera, Storage Card, Computer (and its numerous components), USB Interface, Software Drivers, and Operating System.

Page 4

Delkin Devices User’s Manual

Page 6
Image 6
Delkin Devices 15 manual Formatting a MultiMediaCard, Operational Notes, Compatibility Note