Dell 1012 Replacing the AC Adapter Connector

Replacing the AC Adapter Connector

1. Follow the procedures in Before You Begin.

2. Place the AC adapter connector in the computer base.

3. Route the AC adapter connector cable through the routing guide.

4. Replace the I/O board (see Replacing the I/O Board).

5. Replace the left support bracket (see Replacing the Left Support Bracket).

6. Follow the instructions from step 4 to step 21 in Replacing the System Board.

7. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.