Dell 1012 - page 31


3. Replace the screw that secures the status light board to the computer base.

4. Connect the status light board cable to the connector on the I/O board and press down on the locking tab to secure the status light board cable.

5. Replace the palm rest assembly (see Replacing the Palm Rest Assembly).

6. Replace the hard-drive assembly (see Replacing the Hard-Drive Assembly).

7. Replace the keyboard (see Replacing the Keyboard).

8. Replace the battery (see Replacing the Battery).

Back to Contents Page

CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.