Dell 1012 Display Cable


Replacing the Display Panel

1. Follow the procedures in Before You Begin.

2. Align the display panel with the display cover

3. Connect the camera cable to the connector on the camera module.

4. Replace the four screws that secure the display panel to the display cover.

5. Replace the display bezel (see Replacing the Display Bezel).

6. Replace the display assembly (see Replacing the Display Assembly).

Display Cable

Removing the Display Cable

1. Follow the procedures in Before You Begin.

2. Remove the display assembly (see Removing the Display Assembly).

3. Remove the display bezel (see Removing the Display Bezel).

4. Remove the display panel (see Removing the Display Panel).

5. Turn the display panel over and place it on a clean surface.

6. Pull the pull-tab as shown in the illustration to disconnect the display cable from the connector on the display panel.
1
screws (4)
2
display panel
CAUTION: Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.