CAUTION: Be extremely careful when opening the display to prevent damaging the display assembly.

9.Open the display as far as possible.

10.Disconnect the Mini-Card antenna cables from the Mini-Card.

11.Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the computer.

12.Disconnect the display cable from the connector on the system board.

1Mini-Card cable routing 2 display cable grounding screw

3 display cable

4 antenna cables (2)

connector

 

13.Remove the two screws that secure the display assembly to the computer base.

14.Lift the display assembly off the computer base.

1

screws (2)

 

 

Page 12
Image 12
Dell 1018 manual