Back to Contents Page
Camera Module
Dell™ Inspiron™ 1018 Service Manual
Removing the Camera Module
Replacing the Camera Module
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.
CAUTION: To help prevent damage to the system board, remove the main battery (see Removing the Battery) before working inside the computer.
Removing the Camera Module
1.Follow the instructions in Before You Begin.
2.Remove the battery (see Removing the Battery).
3.Remove the keyboard (see Removing the Keyboard).
4.Remove the
5.Remove the palm rest assembly (see Removing the Palm Rest Assembly).
6.Remove the memory module (see Removing the Memory Module).
7.Remove the middle cover (see Removing the Middle Cover).
8.Remove the display assembly (see Removing the Display Assembly).
9.Remove the display bezel (see Removing the Display Bezel).
10.Remove the display panel (see Removing the Display Panel).
11.Gently remove the camera module from the display back cover.
