Back to Contents Page

Coin-Cell Battery

Dell™ Studio XPS™ 1340 Service Manual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ is not covered by your warranty.

NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your Computer) before working inside the computer.

Removing the Coin-Cell Battery

1.Follow the instructions in Before You Begin.

2.Remove the base cover (see Removing the Base Cover).

3.Disconnect the coin-cell battery cable from the system board connector.

4.Lift the coin-cell battery off the computer base.

1

coin-cell battery cable connector

2

coin-cell battery

 

 

 

 

 

 

 

 

 

 

 

Replacing the Coin-Cell Battery

1.Replace the coin-cell battery.

2.Connect the coin-cell battery cable to the system board connector.

3.Replace the base cover (see Replacing the Base Cover).

4.Slide the battery into the battery bay until it clicks into place.

Back to Contents Page

Page 9
Image 9
Dell 1340 manual Removing the Coin-Cell Battery, Replacing the Coin-Cell Battery