NOTICE: When the
Replacing the Mini-Card
NOTE: The location of the
1. Remove the new
NOTICE: Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.
2.Insert the
3.Press the other end of the
4.Replace the screw that secures the
5.Connect the appropriate antenna cables to the
Connectors on the | Antenna Cable Color Scheme |
|
|
WLAN (2 antenna cables) |
|
Main WLAN (white triangle) | white |
Auxiliary WLAN (black triangle) | black |
|
|
6.Replace the following parts based on the display adapter supported by your computer. • Mobile Intel® GMA:
¡Replace the base cover (see Replacing the Base Cover).
•ATI Mobility Radeon:
¡Replace the system board (see Replacing the System Board).
7.Slide the battery into the battery bay until it clicks into place.
8.Install the drivers and utilities for your computer, as required. For more information, see the Dell Technology Guide.
NOTE: If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities. For more generic driver information, see the Dell Technology Guide.
Back to Contents Page