Removing the Display Panel Cable
NOTE: The display panel cables and connectors may differ depending on the display panel you ordered.
1.Remove the display assembly (see Removing the Display Assembly).
2.Remove the display bezel (see Display Bezel).
3.Remove the display panel (see Display Panel).
4.Turn the display panel over and place it on a clean surface.
1 tape securing the display panel cable to the | 2 display panel |
connector on top | cable |
3back of display panel
5.Lift the tape that secures the display panel cable to the connector on top and disconnect the cable from the connector.
Replacing the Display Panel Cable
1.Reconnect the display cable to the connector on top.
2.Replace the display panel (see Replacing the Display Panel).
3.Replace the display bezel (see Replacing the Display Bezel).
4.Replace the display assembly (see Replacing the Display Assembly).
Display Inverter
Removing the Display Inverter
1.Remove the display assembly (see Removing the Display Assembly).
2.Remove the display bezel (see Removing the Display Bezel).
3.Remove the display panel (see Removing the Display Panel).
4.Disconnect the cables from the connectors on either side of the inverter board.