18 Setting Up the Monitor

Setting Up the Monitor

Preparing the Stand

NOTE: The stand is attached when the monitor is shipped from the factory.
1. Place the monitor on a soft cloth or cushion.
2. Pull the monitor stand arm upwards clear of the monitor.
3. Place the monitor upright.

Connecting Your Monitor

WARNING: Follow the safety instructions before you perform any of the
procedures in this section.
To connect your monitor to the computer:
1. Turn o your computer and disconnect the power cable from the wall outlet.
2. Connect the USB cable and only one of the following display cables to
yourcomputer:
• VGA cable
• DisplayPort cable
• HDMI cable
NOTE: Do not connect multiple display cables to the same computer.