Electrical Specifications
Video input signals Analog RGB, 0.7 Volts +/- 5%, positive polarity at 75 ohm input impedance
Digital DVI TMDS, 600mV for each differential line, positive polarity at 50 ohm input impedance
DP1.2/HDMI1.4 signal input support
Synchronization input signals TTL levels required and separate syncs (including Trigger points), SOG (Composite SYNC on green)
AC input voltage/frequency/current 100 VAC to 240 VAC / 50 Hz or 60 Hz + 3 Hz / 1.5 A (Typical)
Inrush current 120 V : 30 A (Max)
240 V : 60 A (Max)
Physical Characteristics
Connector type 15-pin D-sub miniature, blue connector; DVI-DL, white connector; HDMI/DP(in)/DP(out)/mDP, black connector
Signal cable type DVI: Detachable, DVI-DL, Solid pins, shipped detached from the monitor
Analog: Detachable, D-Sub, 15 pins
DisplayPort: Detachable, DisplayPort, Solid pins
Mini-DP to DP: Detachable, DisplayPort, Solid pins, shipped detached from the monitor
High Definition Multimedia Interface: Detachable, HDMI, 19 pins
Dimensions (with stand)
Height (extended) 487.0 mm (19.17 inches)
Height (compressed) 358.7 mm (14.12 inches)
Width 699.8 mm (27.55 inches)
Depth 194.2 mm (7.65 inches)
Dimensions (without stand)
Height 317.0 mm (12.48 inches)
Width 699.8 mm (27.55 inches)
Depth 61.2 mm (2.41 inches)
Stand dimensions
Height (extended) 401.2 mm (15.80 inches)
Height (compressed) 358.1 mm (14.10 inches)
Width 288.0 mm (11.34 inches)
Depth 194.2 mm (7.65 inches)
Weight
Weight with packaging 11.35 kg(25.02 lb)
Weight with stand assembly and cables 8.34 kg (18.39 lb)
Weight without stand assembly
(For wall mount or VESA mount considerations - no cables) 5.76 kg (12.70 lb)
Weight of stand assembly 1.95 kg (4.30 lb)
Front Frame Gloss Dell Standard Black (Low Gloss 17+/- 3gu)