Dell 2400 manual Installing the Slide Assemblies in the Rack, 5.Removing the 24-URack Doors

hinge pin

hinge insert hinge

Figure 1-5. Removing the 24-U Rack Doors

Installing the Slide Assemblies in the Rack

NOTE: If the slide assemblies were preinstalled by Dell, you may skip this section.

You must allow 6 U (10.5 inches) of vertical space for each PowerEdge 2400 system you install in the rack.

NOTE: The rails of the rack are marked by small indentations in 1-U increments (see Figure 1-6).

support.dell.com Dell PowerEdge 2400 Systems Rack Installation Guide 1-7