Dell 2850 manual LCD Status Messages Line Causes Corrective Actions E0000, Message E0119, Guide

Table 1-4. LCD Status Messages (continued)

Line 1	Line 2	Causes	Corrective Actions
Message	Message
E0000	OVRFLW CHECK LOG	LCD overflow message.	Check the SEL for details
		A maximum of three error	on the events.
		messages can display sequentially
		on the LCD. The fourth message
		displays as the standard overflow
		message.
E0119	TEMP AMBIENT	Ambient system temperature is	See "Troubleshooting System
	TEMP BMC	out of acceptable range.	Cooling Problems" in your
			Installation and Troubleshooting
			Guide.

E0119	TEMP RISER	Riser card is out of acceptable
		temperature range.

See "Troubleshooting System Cooling Problems" in your Installation and Troubleshooting Guide.

E0212	VOLT PG n	System power supply is out of	See "Troubleshooting Redundant
		acceptable voltage range; faulty	Power Supplies" in your
		or improperly installed power	Installation and Troubleshooting
		supply.	Guide.
E0212	VOLT BATT ROMB	Faulty RAID battery.	Replace the RAID battery.
			See "Activating the Optional
			Integrated RAID Controller"
			in your Installation and
			Troubleshooting Guide.
E0212	VOLT BATT CMOS	Faulty system battery.	Replace the system battery.
			See "System Battery" in your
			Installation and Troubleshooting
			Guide.

E0212	VOLT	RISER	5V	Riser card voltage is out of
	VOLT	RISER		acceptable range; faulty or
				improperly installed power
				supply; faulty system board.

Reinstall the expansion-card cage. See "Installing the Expansion- Card Cage" in your Installation and Troubleshooting Guide. If the problem persists, see "Getting Help" in your Installation and Troubleshooting Guide.

E0412	RPM FAN n	Specified cooling fan is faulty,
	FAN REDUNDANCY	improperly installed, or missing.
	LOST

See "Troubleshooting System Cooling Problems" in your Installation and Troubleshooting Guide.

Information Update

7