Chapter 5
5 - 4
Figure 5.1 Example of a multiple data center setup
When you add servers to the network setup, you assign the servers to the
appropriate data centers.
To configure a data center using the Configuration utility
1. In the navigation pane, click Data Centers.
2. On the toolbar, click Add Data Center.
The Add New Data Center screen opens.
3. Add the new data center settings. For help on defining data centers,
click Help on the toolbar.
The data center is added to your configuration.
4. Repeat this process for each data center in your network.
Note
To configure a data center from the command line, refer to Appendix A,
3-DNS Configuration File, in the 3-DNS Reference Guide.