Dell 340 manual Removing the Control Panel

Back to Contents Page

Control Panel

Dell Precision™ WorkStation 340 Service Manual

CAUTION: Before you perform this procedure, see the safety instructions in your System Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.

NOTICE: Before you disconnect a device from the computer or remove a component from the system board, verify that the standby power light on the system board has turned off. To locate the light, see "System Board Components."

Removing the Control Panel

Desktop Computer

1.Remove the front I/O panel.

2.Using an 8-inch #2 Phillips screwdriver, remove the screw that secures the control panel to the computer, and lift the panel away from the computer.

Mini-Tower Computer

1.To remove the top and bottom panels of the computer, remove any installed CD drives and release all the tabs on each panel.