3.Follow the steps below to remove the
a.Disconnect the SATA cable and power cable from the hard drive [1,2].
b.Push the blue tab on the
4.Follow the steps below to remove the hard drive from the
a.Pry along the retention tabs of the
b.Lift and remove the hard drive from the
Installing The Hard Drive
1.Replace the hard drive into the
2.Install the hard drive into its slot in the computer..
3.Connect the SATA cable and the power cable to the hard drive.
4.Install the:
•bezel
•cover
5.Follow the procedures in After Working Inside Your Computer.
12