Installing the mSATA SSD Card
1.Place the mSATA SSD card in its slot in the computer.
2.Tighten the screw to secure the mSATA SSD card to the computer.
3.Install:
a)base cover
b)SD card
c)battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the Memory
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)battery
b)SD card
c)base cover
3.Pry the securing clips away from the memory module until it pops up. Remove the memory module from its connector on the system board.
Installing the Memory
1.Insert the memory module into the memory socket.
2.Press the memory module down until it clicks into place.
3.Install:
a)base cover
b)SD card
c)battery
4.Follow the procedures in After Working Inside Your Computer.
Removing the WLAN / WiGig Card
1.Follow the procedures in Before Working Inside Your Computer.
2.Remove:
a)battery
b)SD card
c)base cover
3.Disconnect the antenna cables from the WLAN/WiGig card and remove the screw that secures the WLAN/WiGig card to the computer. Remove the WLAN/WiGig card from the computer.
14
