8.If applicable, install the optional Dell OpenManage Hardware Instrumentation Package (HIP) or HP OpenView Network Node Manager Special Edition (NMM SE). See Chapter 16, “Configuring SAN Management Applications“ for installa- tion instructions.
9.Install Dell OpenManage ATF, if needed.
10.Install QLogic QLDirect, if needed.
11.Update the following Dell OpenManage software in the following order:
a.Dell OpenManage Data Managed Node
b.Dell OpenManage Data Supervisor or Dell OpenManage Data Administrator
For instructions, see Chapter 11, “Installing, Configuring, and Removing Microsoft Windows SAN Software Components,“ but use the Dell Power- Vault Fibre Channel Update CD Version 4.0 instead of the Dell PowerVault Fibre Channel Utilities CD Version 4.0 listed in Chapter 11 for the Dell OpenManage Data Supervisor and Data Administrator software.
c.Dell OpenManage Array Manager
12.Install and configure the remaining Dell OpenManage data management soft- ware. For instructions, see Chapter 11, “Installing, Configuring, and Removing Microsoft Windows SAN Software Components.“
The remaining Dell OpenManage data management products include Dell OpenManage Data Analyzer and Dell OpenManage Data Detective. See the documentation provided with the application programs for complete installation instructions.
13.Install the PowerVault 5xF download utility from the Dell PowerVault Fibre Channel Utilities CD or Dell PowerVault Fibre Channel Update CD.
14.Reboot the system.
The software upgrade on Windows NT or Windows 2000 is completed.
Updating Software on NetWare Systems
The following sections explain how to update or install the software needed for a SAN on NetWare systems.
Updating the QLogic HBA NVRAM, BIOS, and Drivers in NetWare
The drivers for the Novell NetWare operating system are located on the Dell PowerVault Fibre Channel Utilities CD Version 4.0. They are also located in the <drive letter>:\netware directory of driver and firmware diskette 1 that you made from this CD.
