Dell 8500 manual

1captive screw

2Mini PCI card/modem cover

3.If a Mini PCI card is not already installed, go to step 4. If you are replacing a Mini PCI card, remove the existing card:

a.Disconnect the Mini PCI card from any attached cables.

b.Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.

c.Lift the Mini PCI card out of its connector.

1Mini PCI card connector

2Mini PCI card

3antenna cables (2)

NOTICE: To avoid damaging the Mini PCI card, never place cables on top of or under the card.

NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card.

4.Align the Mini PCI card with the connector at a 45-degree angle, and press the Mini PCI card firmly into the connector, and press down until you feel a click.

5.Connect the antenna cables to the Mini PCI.