Back to Contents | Dell 8500 instruction

1center control cover

2system board connector

4.Remove the keyboard:

a. Remove the two M2.5 x 6-mm screws across the top of the keyboard.

NOTICE: The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the keyboard.

b.Rotate the keyboard up and slide it forward.

c.Hold the keyboard up and slightly forward to allow access to the keyboard connector.

d.Pull up on the keyboard connector tab to disconnect the keyboard connector from the system board.

1M2.5 x 6-mm screws (2)

2keyboard

3palm rest

Dell 8500 manual Back to Contents