Removing and Replacing Parts 25
Keyboard Connector
8Disconnect the keyboard flex cable from the interface connector on the
system board assembly by pulling up on the connector.
NOTICE: Do not pull on the keyboard flex cable.
9Remove the keyboard assembly from the bottom case assembly.
Replacing the Keyboard Assembly
1Place the keyboard on the palmrest at the front of the computer with
the keys face down and the connector toward the back of the
computer.
NOTICE: To avoid damage to the connector pins, press the keyboard
connector evenly into the interface connector, and do not reverse the keyboard
connector.
2Connect the keyboard flex cable to the interface connector on the
system board assembly.
3Carefully turn the keyboard over and fit the keyboard into place.
keyboard flex cable track stick cable