Removing and Replacing Parts 31
6Remove the M2 x 4-mm screw that secures the display-feed flex cable
to the display assembly through the black plastic flex cable retention
bracket (see "14.1-Inch Display Assembly Bezel and Panel").
7Disconnect the bottom flex cable connector from the display-assembly
top cover and inverter connector by pulling straight up on the attached
pull tab.
8Lift and rotate the top of the display panel out of the display-assembly
top cover.
Replacing the 14.1-Inch Display Panel
1Place the bottom edge of the display panel in the bottom of the
display-assembly top cover and elevate the top of the panel with your
hand.
2Place the display panel in the display-assembly top cover.
3Reinstall the five M2 x 4-mm screws that secure the display panel to
the display-assembly top cover.