11
Setting Up Your Studio Hybrid
Connect the Network Cable (Optional)A network connection is not required to
complete this computer setup, but if you have
an existing network or Internet connection that
uses a cable connection (such as a home cable
modem, or Ethernet jack), you can connect
it now.
Use only an Ethernet cable (RJ ‑ 45 connector).
Do not plug a telephone cable (RJ‑11 connector)
into the network connector.
To attach your computer to a network or
broadband device, connect one end of a
network cable to either a network port or a
broadband device. Connect the other end of
the network cable to the network adapter
connector on the back panel of your computer.
A click indicates that the network cable has
been securely attached.