29
Erasing Commands
Erasing All Learned Commands in One Component
STEP 1: | STEP 2: |
30
Erasing Commands
COMMANDS
Press and hold both the COMPONENT button where the command is stored and the ENT (Enter) button at the same time for approximately 3 seconds, until the word “LEARN” is displayed on the LCD screen.
IMPORTANT:You now have 30 seconds to perform the next step while you are in LEARN mode. If you don’t press a button within 30 seconds, LEARN will disappear from the screen, signaling that you have exited erase mode and you will need to start over.
Press and hold both the COMPONENT button you want to erase and the PAUSE button until the display flashes ERASE eight times, followed by SAVED. Release the buttons and the RF10 will then automatically return to normal operating mode.
ERASING
ERASING
COMPONENT | COMPONENT |
BUTTONS | BUTTONS |
ENT | PAUSE |
BUTTON | BUTTON |
COMMANDS
