14
Getting Started With Your System
RAID controller module Six single-color LEDs:
• One battery fault
• One cache active
• One controller fault
• One controller power
• One system identification
• One management Ethernet activity
Six two-color LEDs:
• Four SAS IN link or fault
• One SAS OUT link or fault
• One management Ethernet link speed
Switch
System identification button Located on the front control panel. Thisbutton is
used to locate a system withina rack.
Enclosure mode switch Located on the front of the system. Thisswitch is
not applicable to the PowerVault MD3200 series
storage array.
Password reset switch Located on the back-panel of the RAID controller
module. This switch is used to resetthe storage array
password.
PowerSupplies
AC power supply (per power supply)
Watt age
600 W
Volta ge
100–240 VAC (8.6 A–4.3 A)
Heat dissipation
100 W
Maximum inrush current
Under typical line conditions and over the entire
system ambient operating range, theinrush current
may reach a maximum of 55 A per powersupply for
10ms or less.
LED Indicators (continued)