1

1antenna cables (2)

Hinge Cover

Removing the Hinge Cover

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on the back of the computer).

NOTICE: To avoid damaging the system board, you must remove the main battery before you begin working inside the computer.

NOTICE: The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge cover.

1Follow the procedures in "Before You Begin" on page 109.

2Remove the battery (see "Replacing the Battery" on page 41).

3Remove the two screws inside the battery bay.

Adding and Replacing Parts

125

Page 125
Image 125
Dell E1405 owner manual Removing the Hinge Cover, 125