Dell E1405 Setting Up a Network, Physically Connecting to a Network or Broadband Modem

Setting Up a Network

Physically Connecting to a Network or Broadband Modem

Before you connect your computer to a network that is not wireless, the computer must have a network adapter installed and a network cable connected to it.

To connect a network cable:

1Connect the network cable to the network adapter connector on the right side of your computer.

NOTE: Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it is securely attached.

2Connect the other end of the network cable to a network connection device or a network wall connector.

NOTE: Do not use a network cable with a telephone wall connector.

Network Setup Wizard

The Microsoft® Windows® XP operating system provides a Network Setup Wizard to guide you through the process of sharing files, printers, or an Internet connection between computers in a home or small office.

1Click the Start button, point to Programs→ Accessories→ Communications, and then click Network Setup Wizard.

2On the welcome screen, click Next.

Setting Up a Network

71