Dell E6400, E6400 ATG 1394 Card

Back to Contents Page
 1394 Card
Dell™Latitude™E6400andE6400ATGand
MobileWorkstationPrecision™M2400ServiceManual
Removing the 1394 Card
Replacing the 1394 Card
Removing the 1394 Card


1. Follow the instructions in Before Working on Your Computer.

2. Remove the bottom of the base assembly (see Removing the Bottom of the Base Assembly).

3. Remove the modular drive (see Removing the Modular Drive).

4. Remove the hinge covers (see Removing the Hinge Covers).

5. Remove the heatsink assembly (see Removing the Processor Heatsink Assembly).

6. Remove the display assembly (see Removing the Display Assembly (E6400 and M2400) or Removing the Display Assembly (E6400 ATG)).

7. Remove the LED cover (see Removing the LED Cover).

8. Remove the keyboard (see Removing the Keyboard).

9. Remove the right speaker grill (see Removing the Right Speaker Grill/Fingerprint Reader Assembly).

10. Remove the palm rest assembly (Removing the Palm Rest Assembly).

11. Remove the card cage (see Removing the Card Cage).

12. Disconnect the 1394 cable from the system board, and unroute the cable.

13. Remove the two M2 x 3 screws.

14. Lift the 1394 card up at an angle and remove it.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer.
1
1394 cable connector
2
system board
3
M2 x 3 screws (2)
4
1394 card