6. Remove the four M2.5 x 5-mm screws from the display panel.
7. Lift the display panel out of the display cover and carefully lay the display panel flat on your workspace. Be careful to avoid damaging the display panel
with the hinges and cables on the display cover.
8. Use the pull tab to disconnect the display cable.
9. Remove two M2 x 3-mm screws from the right bracket and two
M2 x 3-mm screws from the left bracket.
1
M2.5 x 5-mm screws (4)
2
display panel
3
display cover
1
display cable connector
2
display cable
3
underside of display panel
1
display panel
2
brackets (2)
3
M2 x 3-mm screws (4)