Dell TABLE 105

610 PowerConnect B-Series FCX Configuration Guide
53-1002266-01
Viewing DSCP-based QoS settings
17
Syntax: show qos-tos
The show qos-tos command displays the following information about 8 to 4 queue mapping.
TABLE 105 8 to 4 queue mapping configuration information
This field... Displays...
Priority-> Hardware Queue
Priority and Hardware Queue The priority to hardware queues that are currently in effect for 8 to 4 queue. QoS
priority 7 is the highest priority, and QoS 0 is the lowest priority
PowerConnect#show qos-tos
DSCP-->Traffic-Class map: (DSCP = d1d2: 00, 01...63)
d2| 0 1 2 3 4 5 6 7 8 9
d1 |
-----+----------------------------------------
0 | 0 0 0 0 0 0 0 0 1 1
1 | 1 1 1 1 1 1 2 2 2 2
2 | 2 2 2 2 3 3 3 3 3 3
3 | 3 3 4 4 4 4 4 4 4 4
4 | 5 5 5 5 5 5 5 5 6 6
5 | 6 6 6 6 6 6 7 7 7 7
6 | 7 7 7 7
Traffic-Class-->802.1p-Priority map (use to derive DSCP--802.1p-Priority):
Traffic | 802.1p
Class | Priority
--------+---------
0 | 0
1 | 1
2 | 2
3 | 3
4 | 4
5 | 5
6 | 6
7 | 7
--------+---------
8to4 queue mapping:
Priority| Hardware Queue
--------+---------
0 | 0
1 | 0
2 | 1
3 | 1
4 | 2
5 | 2
6 | 3
7 | 3
--------+---------